Bathroom Vanity Installation Cost - Fixed Price, Set Finish Date

Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as $199/month*on approved credit; ask for current terms

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Bathroom Vanity Installation Cost in Santa Clarita?

Bathroom vanity installation in Santa Clarita typically costs between $800 and $3,000, with most homeowners landing somewhere around $1,400 to $1,800 for a mid-range single vanity with a pre-mounted sink and basic plumbing reconnection. The final number depends on the vanity itself, whether the plumbing needs to move, and what condition the wall and floor substrate are in once the old unit comes out.

If you want a written price before anyone touches your bathroom, call (747) 294-3985. Under Clause 1 of the Haven Standard, Rowan Construction Group Santa Clarita delivers a flat written price and a written scope before any work begins – no verbal estimates, no “we’ll figure it out as we go.”

Bathroom Vanity Installation Cost Breakdown (2026)

Here is how the cost typically breaks down for a Bathroom Vanity Installation in Santa Clarita across common project types. These ranges reflect actual material and labor pricing in the Santa Clarita market as of 2026 – not national averages pulled from a syndication feed.

What Moves the Number Up or Down

The single biggest variable is the vanity cabinet itself. A 36-inch stock unit from a big-box store runs $300 to $700. A semi-custom cabinet from a manufacturer like KraftMaid – built to your exact dimensions with your chosen finish – runs $900 to $2,200 for the cabinet alone. A fully custom Wellborn piece in a larger bathroom can push $3,000 before installation labor is added. The cabinet is where most of the cost lives, so when you’re comparing quotes, ask each contractor to separate the material cost from the labor cost so you’re comparing apples to apples.

Labor in Santa Clarita runs higher than the national average because of the regional cost of living and the licensed-trades licensing requirements enforced in Los Angeles County. A simple vanity swap takes two to four hours. A double vanity with plumbing relocation and new drywall patches takes a full day, sometimes two. That difference in time is real, and any quote that doesn’t account for it is either leaving something out or planning to add it back in later as a change order.

At Rowan, no change proceeds without a signed change order – that’s not a talking point, it’s the administrative discipline the business was built on across more than 4,000 projects since 2007. If we find water-damaged substrate behind your old vanity (which happens regularly in older Saugus and Canyon Country homes where the original tile work wasn’t waterproofed properly), we stop, document it with photos, write you a change order with a dollar figure, and wait for your signature before we do anything else.

What Affects Bathroom Vanity Installation Pricing in Santa Clarita

• Vanity size and configuration: A 24-inch single vanity in a powder room costs less to source and install than a 72-inch double vanity in a primary bath. The cabinet itself is heavier, requires more wall blocking, and the dual plumbing connections add time. In Santa Clarita’s newer Valencia and Stevenson Ranch tract homes, primary baths are often sized for a 60-inch double – which means you’re in the $1,800 to $2,500 range before you finalize materials.
• Plumbing relocation: If the drain rough-in and supply lines stay in place, installation is straightforward. If you want to center the vanity on the wall and that means moving the drain six inches, you’re looking at opening the wall, reframing the drain, and potentially pulling a permit from the City of Santa Clarita – which adds $150 to $400 to the job. This is worth knowing before you fall in love with a centered layout on a Pinterest board.
• Countertop material: A basic white cultured marble top with an integrated sink is already included with most stock vanity cabinets in the $300 to $700 range. A Cambria quartz top cut to a vessel-sink opening costs $400 to $900 for the slab work alone. A Caesarstone top in a designer color with an undermount Kohler sink can add $600 to $1,200 over a standard integrated top. The top is where the visual payoff is, and also where the upsell pressure tends to land – so go in knowing what you’re choosing and why.
• Existing substrate condition: Santa Clarita’s climate is hot and dry most of the year, but bathroom moisture management is still critical. In homes built before 1995 in Newhall and Canyon Country, we regularly find that the greenboard (paper-faced moisture-resistant drywall, which is not waterproof) behind the old vanity has absorbed enough humidity over the years to go soft. That means cutting out the damaged section, replacing it with cement board, and retiling or repainting before the new vanity goes in. Budget $200 to $600 for this if your home is pre-1995 – it’s not guaranteed, but it’s common enough to plan for.
• Electrical – GFCI outlet: California requires a GFCI-protected outlet within 36 inches of any bathroom sink under the current electrical code. If your bathroom predates that requirement and there’s no outlet near the vanity, bringing it up to code adds $150 to $350 for an electrician to install a new outlet or upgrade an existing one. This is a permit-required task; it cannot legally be skipped on a project that’s otherwise being inspected.
• Faucet and fixture selection: A basic chrome Kohler single-hole faucet runs $80 to $160. A Toto or Kohler widespread faucet in brushed nickel or matte black runs $200 to $450. The faucet itself isn’t a huge line item, but it has to match the top’s sink holes and your hardware finish throughout the bathroom – so picking the faucet before you order the cabinet, not after, saves a trip back to the supplier.

Before

After

How to Save on Bathroom Vanity Installation Without Cutting the Wrong Corners

The fastest way to reduce cost is to keep the drain and supply lines exactly where they are. A like-for-like swap – same footprint, same plumbing locations, no wall work – is the cleanest and least expensive version of this project. If your current vanity is 36 inches and you replace it with another 36-inch unit at the same location, you’re looking at the lower end of the $800 to $1,200 range. Move the plumbing, and you add at least $400 to $800 before permits.

Buy the vanity yourself if you have time to shop. Rowan can install a unit you supply, and if you find a KraftMaid or Wellborn semi-custom cabinet through a kitchen and bath showroom in Valencia or Stevenson Ranch at a better price than we can source it, we’ll price the labor separately. Just confirm the cabinet dimensions before you order – 36 inches wide on the product page doesn’t always mean 36 inches wide at the wall once you account for trim and filler strips.

Get a written, itemized quote before you agree to anything. That’s not advice specific to Rowan – that’s advice for any contractor. A quote that says “vanity installation – $1,500” tells you nothing about what’s included or what’s excluded. A quote that separates demo, cabinet, top, faucet, plumbing labor, drywall repair, and permit costs tells you exactly where the money is going and where you might be able to substitute a different material to hit a lower number.

If you have a contractor’s written estimate and you want a second set of eyes on it, Rowan offers a free, line-by-line review of any written estimate – no charge, no obligation. Call (747) 294-3985 to schedule that conversation. Grant Rowan’s team has been doing this since 2007 and can usually spot within a few minutes where a quote is missing something or where a material substitution would get you to the same result for less.

One corner worth not cutting: the substrate. If there’s soft drywall or damaged tile behind your existing vanity, skipping the repair to save $300 now will cost you $1,200 to $1,800 in mold remediation and redo work in two years. The photo record Rowan delivers on every visit documents the substrate condition before the new vanity goes in – so you have evidence of what was there and what was done, which matters if you ever sell the home or need to make a warranty claim.

FAQs – Bathroom Vanity Installation Cost in Santa Clarita

How much does bathroom vanity installation cost in Santa Clarita in 2026?

Bathroom vanity installation in Santa Clarita costs $800 to $3,000 for most residential projects. A basic single-vanity swap with no plumbing changes runs $800 to $1,200. A double vanity with semi-custom cabinets, a stone top, and minor plumbing work lands in the $1,800 to $2,500 range. Full custom projects with Cambria or Caesarstone tops, Kohler or Toto fixtures, and relocated plumbing can reach $3,000 or more once permit fees are included. Call (747) 294-3985 for a written price specific to your bathroom – estimates are free and come with a written scope before any work starts.

Do I need a permit to install a bathroom vanity in Santa Clarita?

A permit is not required for a like-for-like vanity replacement where the drain and supply lines stay in the same location. A permit is required by the City of Santa Clarita when the drain rough-in or supply lines are relocated, when new electrical outlets are added, or when structural changes are made to the wall. Permit fees in Santa Clarita typically run $150 to $400 for this scope of work. Any contractor who tells you permits are never needed for a vanity job is skipping a step that exists to protect the homeowner – not the contractor. Rowan pulls permits whenever the code requires one and documents the inspection sign-off as part of the project record.

How long does bathroom vanity installation take?

A single vanity replacement with no plumbing changes takes two to four hours for an experienced crew. A double vanity with minor plumbing adjustments takes four to seven hours, typically completing in one day. If substrate repairs, tile work, or plumbing relocation are involved, the project runs one to two full days. Rowan schedules a confirmed start time and gives you a photo record of the completed work before the crew leaves – so you’re not waiting around for a callback to know the job is done.

Is it cheaper to repair or replace a bathroom vanity?

Repair is cost-effective when the cabinet box is structurally sound and the only issues are cosmetic – a damaged countertop, a broken hinge, or a worn finish. Replacing just a vanity top runs $200 to $600 for materials and labor, which is worthwhile if the cabinet itself is in good shape. If the cabinet box has water damage at the toe kick or floor contact point, or if the drawer boxes are swelling and failing, replacement is almost always the better call. A $300 repair on a failing cabinet typically delays the full replacement by one to two years at most. Rowan can assess the condition of your existing vanity during the estimate visit and give you both numbers in writing so you can decide without pressure.

Can the vanity installation be done in one day?

Yes, most single-vanity installations in Santa Clarita are completed in a single day. Double-vanity projects with standard plumbing connections are also typically one-day jobs. The exceptions are projects where the permit inspection has to be scheduled separately (which can add a day or two of wait time depending on the city’s inspection schedule) or where unexpected substrate damage requires drywall drying time before the new vanity can be set. Rowan will give you a realistic timeline in writing before the project starts – not a best-case estimate that turns into an apology.

What brands does Rowan use for vanity cabinets and fixtures?

For vanity cabinets, Rowan sources from KraftMaid and Wellborn, both of which offer semi-custom and custom configurations that fit non-standard bathroom dimensions – common in Santa Clarita’s Valencia-era tract homes where the original vanity footprints don’t match standard stock sizes. For countertops, we work with Cambria and Caesarstone quartz. For fixtures and faucets, we spec Kohler and Toto as our primary lines, with project-specific selections based on the sink configuration and the finish you’re matching throughout the bathroom. All of these are sourced through vetted supply relationships that allow us to quote honest numbers – not inflated material costs with a hidden margin built in.

Does Rowan offer a warranty on vanity installation work?

Yes. Every Rowan project is covered by the 365-Day Done Right Promise: if something we installed isn’t right, we make it right within the warranty period. The warranty terms are printed in your written quote – not summarized in a footnote, not referenced by asterisk. The promise applies to labor and to materials that were supplied by Rowan as part of the project scope. For manufacturer defects on cabinets or fixtures, the applicable manufacturer warranty applies and Rowan will act as the point of contact to manage that process on your behalf.

Key Takeaways

• Bathroom vanity installation in Santa Clarita costs $800 to $3,000, with most mid-range projects landing between $1,400 and $1,800.
• Keeping the plumbing in place is the single most effective way to control cost – relocation adds $400 to $800 and usually triggers a permit requirement.
• Pre-1995 homes in Newhall, Canyon Country, and Saugus frequently have substrate damage behind old vanities; budget $200 to $600 as a contingency.
• Permits from the City of Santa Clarita cost $150 to $400 and are required when drain lines move or new electrical is added.
• Rowan delivers a flat written price before any work starts, no change proceeds without a signed change order, and every visit includes a documented photo record.
• The 365-Day Done Right Promise is in writing on every project – not a verbal assurance.
• Free second opinion: bring any written contractor estimate to (747) 294-3985 and Grant Rowan’s team will review it line by line at no charge.

About This Page and Our Work in Santa Clarita

Rowan Construction Group has been completing bathroom remodeling projects across Santa Clarita since 2007 – Valencia, Stevenson Ranch, Saugus, Canyon Country, Newhall, and the surrounding communities. We understand the specific conditions that affect bathroom work here: the hot, dry climate that still produces significant humidity inside bathroom spaces, the pre-1995 construction standards in older Newhall and Canyon Country homes, and the permit and inspection processes through the City of Santa Clarita’s Building and Safety Division. That local context is part of why we write the prices the way we do – they reflect what work actually costs here, not what a national pricing database says it should cost.

Grant Rowan founded this company on the principle that a customer shouldn’t have to wonder what they agreed to pay. A written price, a written scope, a signed change order for anything that changes, a photo record when the crew leaves – that’s the system, and it’s been the same system across more than 4,000 projects. If you’re planning a bathroom vanity installation in Santa Clarita and you want a number in writing before anyone shows up at your door, the number to call is (747) 294-3985.

For a broader look at what a full bathroom renovation costs and what it includes, visit the home page for an overview of all seven trades Rowan handles, or read through the bathroom remodeling section for scope-specific pricing on walk-in showers, tub-to-shower conversions, and full bathroom remodels.

Estimates are free, written, and delivered before any work starts. Call (747) 294-3985 to schedule yours.

Written by Grant Rowan, Owner at Rowan Construction Group, serving Santa Clarita since 2007.

Pricing reflects the Santa Clarita market as of 2026. Rowan Construction Group Santa Clarita offers free estimates – call (747) 294-3985.