Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Bathroom Remodeling: The Santa Clarita Owner’s Guide
We stock and install Boral-compatible bathroom remodeling systems in Santa Clarita, with typical installed projects running $9,000-$28,000 depending on scope, materials, and whether we’re working within an existing footprint or reconfiguring walls. Most Boral product consultations can be scheduled within 24-48 hours, and we carry common Boral trim, siding, and waterproofing components on our trucks for the Santa Clarita climate. Homeowners usually discover an issue when they notice soft drywall behind tile, a musty smell that doesn’t clear, or grout lines that keep cracking despite re-caulking - all signs that the waterproofing layer beneath the surface has failed.
Which Boral Models This Applies To
Boral’s bathroom-adjacent product lines fall into three categories we encounter regularly in Santa Clarita: the Boral TruExterior trim and siding used in exterior bathroom bump-outs and window surrounds, Boral Versetta Stone accent walls in spa-style wet rooms, and the Boral AquaKor waterproofing substrates that sit behind tile in full-gut remodels. Each has distinct identification markers. TruExterior carries a stamped date code and “BTX” prefix on the back face; Versetta Stone panels have a molded corner lug pattern unique to each color batch; AquaKor board is gray, 1/2-inch or 5/8-inch, with a fiberglass mesh face that differs from cement board’s smoother finish.
The OEM-versus-aftermarket decision matters most with AquaKor. Boral’s factory membrane, sold in 3-foot rolls with a blue release liner, bonds to the board at a molecular level that generic liquid-applied membranes don’t replicate. We’ve tested three aftermarket equivalents on Santa Clarita jobs - two delaminated within 18 months on south-facing walls where afternoon heat builds. For TruExterior trim, quality PVC alternatives exist from Kleer and Azek, but they expand at different rates; in Stevenson Ranch, where summer temperatures swing 40 degrees from morning to peak, we’ve seen miter joints open on mismatched materials. We stock Boral-specified fasteners and color-matched touch-up kits on every bathroom truck to avoid that mismatch.
Signs Your Boral Bathroom Remodeling Is Failing

- Soft or discolored drywall near tub or shower surrounds. This indicates the AquaKor membrane or cement board backing has breached, letting moisture wick into the wall cavity. In Santa Clarita’s dry climate, homeowners often miss this until the drywall turns chalky because evaporation hides the leak path.
- Grout cracking in the same pattern after re-grouting. The substrate beneath the tile is flexing, usually because Boral AquaKor board was installed without the required gap at floor transitions, or because a non-Boral thinset was used that doesn’t bond to the fiberglass mesh.
- Musty odor that intensifies after shower use. Water is reaching the stud cavity. We’ve traced this in Valencia homes to failed AquaKor seam tape at the shower pan threshold, where daily thermal cycling eventually breaks the seal.
- TruExterior trim pulling away from window frames in bathroom bump-outs. Boral’s poly-ash composite moves differently than the PVC trim it replaced; if the installer used standard wood screws instead of Boral’s specified trim-head fasteners, thermal expansion pops the face.
- Versetta Stone panels sounding hollow when tapped. The adhesive bed has failed, often from moisture vapor drive in bathrooms with inadequate exhaust. Santa Clarita’s hard water accelerates this when mineral deposits clog fan ducts and humidity lingers.
Before
AfterReplacement Cost & What’s Included
Full Boral bathroom remodeling in Santa Clarita runs $9,000-$28,000 installed, with small bathrooms starting around $5,000-$12,000 for a refresh within existing walls. The range depends on four factors: whether we keep the existing layout (lower) or move plumbing (higher), the Boral product tier selected, the condition of the substrate we find after demo, and whether HOA approval is required in communities like Stevenson Ranch or Bridgeport.
Every quote we write itemizes materials and labor separately. Boral AquaKor board runs $2.50-$4.00 per square foot material-only; TruExterior trim at $4.50-$7.00 per linear foot; Versetta Stone panels at $18-$26 per square foot with adhesive and fasteners. Labor includes demolition, substrate prep, installation per Boral’s written specs, and our documented photo record at each phase. Under Clause 1 of the Haven Standard, that written price is locked - no work proceeds on any change until the change order is signed, which is how we’ve kept 4,000-plus projects within a few percent of the original number.
Our 365-Day Done Right Promise covers the installation. If a seam opens or a panel delaminates, we make it right. The Boral material warranty runs separately through the manufacturer; we register it on the homeowner’s behalf and file any claims if a factory defect appears.
DIY or Call Us?

An owner can safely check three things: run the exhaust fan during showers and 20 minutes after, inspect caulk lines annually for gaps, and confirm the bathroom door has a gap at the bottom for air circulation. These are maintenance, not repair.
Where DIY goes wrong is the substrate work. Removing tile from AquaKor board without damaging the waterproof membrane requires knowing where the warranty layer ends and the structural layer begins. We’ve been called to six Santa Clarita jobs in the past two years where a homeowner’s tile removal exposed the membrane, then their replacement thinset didn’t bond to the fiberglass mesh, trapping moisture. The repair cost tripled because we had to remove and replace board that a pro would have preserved.
There’s also the permit question. Santa Clarita requires permits for any plumbing relocation and for electrical work near tubs and showers. We pull them, schedule inspections, and pass them - it’s included in our flat price. Call (747) 294-3985 to schedule your free estimate and we’ll show you exactly what we found on the last Boral job we documented.
FAQs
Properly installed Boral AquaKor systems last 15-25 years in Santa Clarita’s climate, though south-facing walls with direct sun exposure may see membrane fatigue at the lower end of that range. The key variable is exhaust fan performance; bathrooms without adequate ventilation cut that lifespan by half. Call (747) 294-3985 for an exact quote - estimates are free.
Localized membrane breaches can sometimes be patched with Boral’s factory seam tape and liquid flash, but only if the surrounding board is dry and the fiberglass mesh is intact. We’ve found that “small patches” often mask larger saturation; our photo documentation shows the full extent before we recommend repair versus replacement. Call (747) 294-3985 for an exact quote - estimates are free.
A standard 5-by-8-foot bathroom with Boral materials takes 10-14 working days from demo to final inspection, assuming no plumbing relocation. Moving fixtures or waiting on HOA approval in Santa Clarita communities adds 3-7 days. We provide a written schedule with the quote, not after. Call (747) 294-3985 for an exact quote - estimates are free.
We carry Boral AquaKor board, TruExterior trim in common Santa Clarita colors, seam tape, and specified fasteners on every bathroom crew truck. Versetta Stone panels are job-ordered by color batch to ensure match, with 3-5 day lead time. Call (747) 294-3985 for an exact quote - estimates are free.
Written by Grant Rowan, Owner, Rowan Construction Group Santa Clarita at Rowan Construction Group Santa Clarita, serving Santa Clarita and nearby areas.







Before
After
Before
After